The MS 261 C-M is a rugged all-rounder equipped with STIHL's environmentally friendly 2-MIX engine technology for less fuel consumption and less emission and outstanding cutting performance. In addition the MS 261 features the HD2 air filter for long filter life. The new MS 261 C-M is now fitted with STIHL's M-TRONIC electronic engine management system which enables the saw to automatically adjust to varying fuel grades, changes in altitude and temperature and makes starting this saw easier than ever before, simply push the start lever to the on position and pull. The new MS 261 C-M has taken performance to a new level.

STIHL MS 261 C-M Professional Chainsaw

AU$1,499.00Price
  • Displacement cc 50.2
    Power output kW/bhp 2.9/3.9
    Weight (kg) 5.2
    STIHL Oilomatic saw chain pitch/type 0.325"

     

  • HD2-Filter

    This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to special material, the filter can be washed clean, for example with STIHL Variocleanand warm water.

     

    Pre-separation air filtration system

    The innovative long-life air filter system greatly extends the service life of the filter. Air routing removes larger particles of dirt, meaning the actual filter has less to do. So the saw can be used for longer without having to clean the filter.

     

    Decompression valve

    The decompression valve is part of the easy start-system. The valve should be pressed before starting in order to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic, meaning that it must be pressed manually before starting, but then closes automatically.

     

    STIHL 2-MIX Engine

    The new 2-MIX engine features an advanced stratified charge system that boosts power, whilst reducing consumption and pollution, significantly lowering unburned hydrocarbons in the exhaust. The result is a cleaner, more fuel efficient engine.

     

    STIHL M-Tronic (M)

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

     

    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result: lower consumption and high torque across a broad rpm range.

     

    Anti-vibration system

    Intense vibration at the handles of power tools can lead to longer-term effects of blood vessels in the hands and arms. STIHL have therefore developed an effective anti-vibration system where by the oscillations from the machines engine are dampened which significantly reduces vibrations at the handles.

     

    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

     

    Captive bar nuts

    Bar nuts held captive in the sprocket cover will not get lost when changing over the cutting attachment.

     

    Variable-displacement oil pump

    The exact chain oil output can be adjusted maunally for varying conditions, allowing for a reduction of up to 50%.

     

    STIHL Ematic-System

    The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption up to 50%.

We offer personal home delivery in areas around us within 5Km radius. This includes the following:
Newtown, Annandale, Camperdown, Leichhardt, Petersham, St Peters, Marrickville, Haberfield, Lilyfield, Rozelle, Ultimo, Eveleigh, Haymarket & Rodd Point.
Please contact us if in doubt.

Contact Us

Tel. (02) 9518 1899

info@stihlstanmore.com.au

Accepted In Store

  • Facebook Clean
  • White Google+ Icon

2018 All content © copyright. All Rights Reserved

STIHL Shop Stanmore